Installation
Once the device is assembled as described in the Assembly section, the device can be installed in a location which has access to 2 power outlets and a Wifi network.
Once the device is placed in the preferred location, the device will power up automatically when plugged in.
The device will run through the startup procedure automatically and will begin the thermal image processing once the initial sequence completes.
Once completed, you will be presented with a screen as shown in the Figure below.
From here you will need to connect to the wifi network to access the Tracer.World features.
The device can be run in offline mode where you will only be able to view the thermal image processing on the monitor provided.